python常用运维脚本实例小结

脚本专栏 2024/11/2 佚名

3 2 1

圆月山庄资源网 Design By www.vgjia.com

一、ps 可以查看进程的内存占用大小，写一个脚本计算一下所有进程所占用内存大小的和。

（提示，使用ps aux 列出所有进程，过滤出RSS那列，然后求和）

注：ps -ef 与 ps aux 效果一样使用随意

import os

list = []

sum = 0  

str1 = os.popen('ps aux','r').readlines()

for i in str1:

  str2 = i.split()

  new_rss = str2[5]

  list.append(new_rss)

for i in list[1:-1]: 

  num = int(i)

  sum = sum + num 

print '%s:%s' %(list[0],sum)

二、一键部署lvs与keepalived

注：部署keepalived配置文件，会自动将lvs部署好，不必单独搭建，但是要下载好ipvsadm

这里单独搭建了lvs

#提前配置好免密钥登陆，与apache服务

import pexpect
import os
ds_ip = '192.168.102.143'
rs1_ip = '192.168.102.144'
rs2_ip = '192.168.102.145'
vip = '192.168.102.250'
ds_cmd = ['ipvsadm -C',
     'ipvsadm -A -t {vip}:80 -s rr'.format(vip=vip),
     'ipvsadm -a -t {vip}:80 -r {rs1_ip}:80 -g'.format(vip=vip, rs1_ip=rs1_ip),
     'ipvsadm -a -t {vip}:80 -r {rs2_ip}:80 -g'.format(vip=vip,rs2_ip=rs2_ip),
     'ifconfig ens33:0 {vip} broadcast {vip} netmask 255.255.255.255 up'.format(vip=vip),
     'route add -host {vip} dev ens33:0'.format(vip=vip)
     ]
# for ds_cmd in ds_cmd:

rs1_cmd = [
  'ansible rs1 -m shell -a "ifconfig lo:0 {vip} broadcast {vip} netmask 255.255.255.255 up" &>/dev/null'.format(vip=vip),
  'ansible rs1 -m shell -a "route add -host {vip} dev lo:0" &>/dev/null'.format(vip=vip),
  'ansible rs1 -m shell -a "echo "1" > /proc/sys/net/ipv4/conf/lo/arp_ignore" &>/dev/null',
  'ansible rs1 -m shell -a "echo "2" > /proc/sys/net/ipv4/conf/lo/arp_announce" &>/dev/null',
  'ansible rs1 -m shell -a "echo "1" > /proc/sys/net/ipv4/conf/all/arp_ignore" &>/dev/null',
  'ansible rs1 -m shell -a "echo "2" > /proc/sys/net/ipv4/conf/all/arp_announce" &>/dev/null',
  'service httpd restart']
# for rs_cmd in rs_cmd:

rs2_cmd = [
  'ansible rs2 -m shell -a "ifconfig lo:0 {vip} broadcast {vip} netmask 255.255.255.255 up" &>/dev/null'.format(vip=vip),
  'ansible rs2 -m shell -a "route add -host {vip} dev lo:0" &>/dev/null'.format(vip=vip),
  'ansible rs2 -m shell -a "echo "1" > /proc/sys/net/ipv4/conf/lo/arp_ignore" &>/dev/null',
  'ansible rs2 -m shell -a "echo "2" > /proc/sys/net/ipv4/conf/lo/arp_announce" &>/dev/null',
  'ansible rs2 -m shell -a "echo "1" > /proc/sys/net/ipv4/conf/all/arp_ignore" &>/dev/null',
  'ansible rs2 -m shell -a "echo "2" > /proc/sys/net/ipv4/conf/all/arp_announce" &>/dev/null',
  'service httpd restart']

ansible='''
echo "[rs1]"  /etc/ansible/hosts;
echo "{rs1_ip}"  /etc/ansible/hosts;
echo "[rs2]"  /etc/ansible/hosts;
echo "{rs2_ip}"  /etc/ansible/hosts;
'''.format(rs1_ip=rs1_ip,rs2_ip=rs2_ip)


def Ansible():
  res = os.system('yum install ansible -y &>/dev/null')
  if res== 0:
    print('ansible安装完成！')
    os.system(ansible)


def lvs():
  i = os.system('yum -y install ipvsadm &>/dev/null')
  if i == 0:
    print('lvs下载完成')
    for a in ds_cmd:
      res = os.system(a)
      if res == 0:
        print('ok')
      else:
        print('false')
    for b in rs1_cmd:
      res1 = os.system(b)
      if res1 == 0:
        print('ok')
      else:
        print('false')
    for c in rs2_cmd:
      res2 = os.system(c)
      if res2 == 0:
        print('ok')
      else:
        print('false')
  else:
    print('lvs下载失败')

keepalived = '''
#全局配置
! Configuration File for keepalived
#全局配置
global_defs {
  notification_email {
    #收件人地址
  }
    #邮件服务器
}
VRRP配置DS1
vrrp_instance VI_1 {
  state MASTER          #角色类型MASTER|BACKUP
  interface ens33          #网卡名称
  virtual_router_id 51      #虚拟路由id（需要与BACKUP一致）
  priority 100          #优先级
  advert_int 1          #没1秒检查一次
  #nopreempt            #非抢占模式

  authentication {
    auth_type PASS        #认证类型 主备之间必须一样
    auth_pass 1111        #认证密码 主备之间必须一样
  }
  virtual_ipaddress {
    192.168.102.250        #虚拟ip（vip）
  }
}

#LVS配置
virtual_server 192.168.102.250 80 {
  delay_loop 3          #健康检查时间间隔
  lb_algo rr            #负载均衡调度算法
  lb_kind DR            #负载均衡转发规则
  protocol TCP          #协议

  real_server 192.168.102.144 80 {  #要监控的real_server的ip和端口号
      weight 1         #权重
    TCP_CHECK {          #基于tcp协议的检查
      connect_timeout 3     #连接时间超时
      retry 3          #重连次数
      delay_before_retry 3  #重连间隔时间
    }
  }


  real_server 192.168.102.145 80 {
      weight 1
    TCP_CHECK {
      connect_timeout 3
      retry 3
      delay_before_retry 3
    }
  }
}'''
def Keepalived():
  d = os.system('yum install keepalived -y &> /dev/null')
  if d == 0:
    print('keeplived下载完成')
    with open(r'/etc/keepalived/keepalived.conf', 'w', encoding='utf-8') as f:
      f.write(keepalived)
    e = os.system('systemctl start keepalived')
    if e == 0:
      print('keepalived部署完成！')
    else:
      print('keepalived部署失败')
  else:
    print('keepalived下载失败')

def main():
  # key()
  Ansible()
  # ssh_copy()
  lvs()
  Keepalived()

if __name__ == '__main__':
  main()

三、用python3编写一个监控上面lvs服务状态和系统资源的脚本

import yagmail
import paramiko
import socket
import re
import time
ssh = paramiko.SSHClient()
ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy())
rs1_ip = '192.168.102.144'
rs2_ip = '192.168.102.145'
ds_ip = '192。168.102.143'
disk_cmd = "df -m | grep /dev/sda1 | awk '{print $4}'"
cpu_cmd = '''
top n 1 d 1 b -p 1 | grep '%Cpu' | awk -F "," '{print $4}' | awk -F "id" '{print $1}' | awk -F "." '{print $1}'
'''
free_cmd = "free -m | grep Mem |awk '{print $7}'"

def connect1():
  ssh.connect('{rs1_ip}'.format(rs1_ip=rs1_ip), 22, 'root', '1', timeout=3)
def connect2():
  ssh.connect('{rs2_ip}'.format(rs2_ip=rs1_ip), 22, 'root', '1', timeout=3)

def mail(head, Contents):
  yag = yagmail.SMTP(user="15898297124@163.com", password="zz54605519", host='smtp.163.com')
  yag.send('15898297124@163.com',subject = head, contents = Contents)
  yag.close()

def http():
  socket.setdefaulttimeout(1)
  server = socket.socket()
  host_list = ['%s:80' % (rs1_ip),'%s:80' % (rs2_ip)]
  for info in host_list:
    ip = re.compile('(.*"color: #ff0000">四、用python编写一键部署数据库主从服务
主服务器


import pexpect
import os
import configparser

# HOSTNAME_DB1='db1'
# HOSTNAME_DB2='db2'
# DB1 = '192.168.254.24'
# DB2 = '192.168.254.27'
DBPASSWORD = '1'

def repo():
  os.system('touch /etc/yum.repos.d/mariadb.repo')
  with open('/etc/yum.repos.d/mariadb.repo','w',encoding='utf8') as f:
    f.write('[mariadb]')
  config = configparser.ConfigParser()
  config.read("/etc/yum.repos.d/mariadb.repo", encoding="utf-8")
  config.set('mariadb', 'name', 'MariaDB')
  config.set('mariadb', 'baseurl', 'http://mirrors.ustc.edu.cn/mariadb/yum/10.3/centos7-amd64/')
  config.set('mariadb', 'gpgkey', 'http://mirrors.ustc.edu.cn/mariadb/yum/RPM-GPG-KEY-MariaDB')
  config.set('mariadb', 'gpgcheck', '1')
  config.write(open('/etc/yum.repos.d/mariadb.repo','w'))
def mariadb():
  a = os.system('yum install MariaDB -y &> /dev/null')
  if a == 0:
    b = os.system('systemctl start mariadb &> /dev/null')
    if b == 0:
      print('mariadb启动成功')
    child = pexpect.spawn('mysql_secure_installation')
    child.expect('enter for none')
    child.sendline('')
    child.expect('Y/n')
    child.sendline('y')
    child.expect('New')
    child.sendline(DBPASSWORD)
    child.expect('Re-enter')
    child.sendline(DBPASSWORD)
    child.expect('successfully')
    child.sendline('')
    child.sendline('')
    child.sendline('')
    child.sendline('')
    child.interact()
    child.close()
def db1():
  config = configparser.ConfigParser()
  config.read("/etc/my.cnf.d/server.cnf", encoding="utf-8")
  config.set('mysqld', 'server-id', '1')
  config.set('mysqld', 'log-bin', 'mysql-bin')
  config.write(open('/etc/my.cnf.d/server.cnf','w'))
  b = os.system('systemctl restart mariadb')
  if b == 0:
    # os.system('mysql -uroot -p%s' % DBPASSWORD)
    # os.system("CREATE USER 'slave'@'%' IDENTIFIED BY 'slave';")
    # os.system("GRANT REPLICATION SLAVE ON *.* TO 'slave'@'%';")
    # os.system('flush privileges;')
    # os.system('show master status')
    child = pexpect.spawn('mysql -uroot -p1')
    child.expect('none')
    child.sendline("CREATE USER 'slave'@'%' IDENTIFIED BY 'slave';")
    child.expect('none')
    child.sendline("GRANT REPLICATION SLAVE ON *.* TO 'slave'@'%';")
    child.expect('none')
    child.sendline('flush privileges;')
    child.expect('none')
    child.sendline('show master status;')
    child.interact()
    child.close()
def main():
  repo()
  mariadb()
  db1()
if __name__ == '__main__':
  main()


从服务器


import pexpect
import os
import configparser

# HOSTNAME_DB1='db1'
# HOSTNAME_DB2='db2'
DB1 = '192.168.102.143'
# DB2 = '192.168.254.27'
DBPASSWORD = '1'

def repo():
  os.system('touch /etc/yum.repos.d/mariadb.repo')
  with open('/etc/yum.repos.d/mariadb.repo','w',encoding='utf8') as f:
    f.write('[mariadb]')
  config = configparser.ConfigParser()
  config.read("/etc/yum.repos.d/mariadb.repo", encoding="utf-8")
  config.set('mariadb', 'name', 'MariaDB')
  config.set('mariadb', 'baseurl', 'http://mirrors.ustc.edu.cn/mariadb/yum/10.3/centos7-amd64/')
  config.set('mariadb', 'gpgkey', 'http://mirrors.ustc.edu.cn/mariadb/yum/RPM-GPG-KEY-MariaDB')
  config.set('mariadb', 'gpgcheck', '1')
  config.write(open('/etc/yum.repos.d/mariadb.repo','w'))

def mariadb():
  a = os.system('yum install MariaDB -y')
  if a == 0:
    b = os.system('systemctl start mariadb &> /dev/null')
    if b == 0:
      print('mariadb启动成功')
    child = pexpect.spawn('mysql_secure_installation')
    child.expect('enter for none')
    child.sendline('')
    child.expect('Y/n')
    child.sendline('y')
    child.expect('New')
    child.sendline(DBPASSWORD)
    child.expect('Re-enter')
    child.sendline(DBPASSWORD)
    child.expect('successfully')
    child.sendline('')
    child.sendline('')
    child.sendline('')
    child.sendline('')

def db2():
  config = configparser.ConfigParser()
  config.read("/etc/my.cnf.d/server.cnf", encoding="utf-8")
  config.set('mysqld', 'server-id', '2')
  config.write(open('/etc/my.cnf.d/server.cnf','w'))
  b = os.system('systemctl restart mariadb')
  if b == 0:
    bin = 'mysql-bin.000001'
    pos = 765
    # os.system('mysql -uroot -p%s' % DBPASSWORD)
    # os.system('''mysql -uroot -p%s -e "CHANGE MASTER TO MASTER_HOST='%s', MASTER_USER='slave', MASTER_PASSWORD='slave', MASTER_LOG_FILE='%s', MASTER_LOG_POS=%s;"''' % (DBPASSWORD,DB1,bin,pos))
    # os.system("mysql -uroot -p%s -e 'start slave;'" % DBPASSWORD)
    child = pexpect.spawn('mysql -uroot -p%s' % DBPASSWORD)
    child.expect('none')
    child.sendline("CHANGE MASTER TO MASTER_HOST='%s', MASTER_USER='slave', MASTER_PASSWORD='slave', MASTER_LOG_FILE='%s', MASTER_LOG_POS=%s;" % (DB1,bin,pos))
    child.expect('none')
    child.sendline( 'start slave;' )
    child.interact()
    child.close()
def main():
  repo()
  mariadb()
  db2()
if __name__ == '__main__':
  main()




以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持。

python,运维脚本

标签：

python,运维脚本

圆月山庄资源网 Design By www.vgjia.com

广告合作：本站广告合作请联系QQ：858582 申请时备注：广告合作（否则不回）
免责声明：本站文章均来自网站采集或用户投稿，网站不提供任何软件下载或自行开发的软件！如有用户或公司发现本站内容信息存在侵权行为，请邮件告知！ 858582#qq.com

圆月山庄资源网 Design By www.vgjia.com

评论“python常用运维脚本实例小结”

暂无评论...

www.vgjia.com 圆月山庄资源网

139,976互联网资源

144,792高清电影

21,817无损音乐

631,128技术资源

RTX 5090要首发性能要翻倍！三星展示GDDR7显存

三星在GTC上展示了专为下一代游戏GPU设计的GDDR7内存。

首次推出的GDDR7内存模块密度为16GB，每个模块容量为2GB。其速度预设为32 Gbps（PAM3），但也可以降至28 Gbps，以提高产量和初始阶段的整体性能和成本效益。
据三星表示，GDDR7内存的能效将提高20%，同时工作电压仅为1.1V，低于标准的1.2V。通过采用更新的封装材料和优化的电路设计，使得在高速运行时的发热量降低，GDDR7的热阻比GDDR6降低了70%。

更新日志

2024年11月02日

python常用运维脚本实例小结

python,运维脚本

pytorch实现MNIST手写体识别

Python3.7实现验证码登录方式代码实例

评论“python常用运维脚本实例小结”

RTX 5090要首发性能要翻倍！三星展示GDDR7显存

更新日志

友情链接

python常用运维脚本实例小结

python,运维脚本

pytorch实现MNIST手写体识别

Python3.7实现验证码登录方式代码实例

评论“python常用运维脚本实例小结”

RTX 5090要首发 性能要翻倍！三星展示GDDR7显存

更新日志

友情链接

RTX 5090要首发性能要翻倍！三星展示GDDR7显存